ATIC Computers - Servers / Supermicro S2011 - SSG-6047R-E1R36N - SSG-6047R-E1R36N 4U-Tower Storage 2xS2011 DDR3-ECC ER 36x3.5`` HDD 4xGLAN IPMI 2x1280W

SSG-6047R-E1R36N 4U-Tower Storage 2xS2011 DDR3-ECC ER 36x3.5`` HDD 4xGLAN IPMI 2x1280W

4U-Tower SuperStorage - Dual LGA2011 Socket for Intel Xeon E5 2600-Series CPU - DDR3-ECC or ECC-REG (24 slots, max 768GB RAM) - 36x 3.5`Hot-Swap HDD trays - LSI 2208 SAS SATA Hardware raid 0,1,5,6,10,50,60, Jbod - Quad GLAN ports, 1x IPMI2.0 port - 2x 1280W Redundant power - ( Optioanl Rail kit for 4U ) - 4U Rackmount - 1 Year Depot Carry-In Mfg. Warranty

Product SKUs

SSG-6047R-E1R36N	SuperServer 6047R-E1R36N (Black)


Motherboard

Super X9DRi-LN4F+


Processor/Cache

CPU	Intel® Xeon® processor E5-2600 (up to 130W TDP) Dual Socket R (LGA 2011)
Cache	Up to 20MB
System Bus	QPI up to 8 GT/s


System Memory

Memory Capacity	24x 240-pin DDR3 DIMM sockets Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets
Memory Type	1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C602 Chipset
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS	LSI 2108 SAS2 RAID (BBU optional) Hardware RAID 0, 1, 5, 6, 10, 50, 60
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Renesas SH7757 BMC
Network Controllers	Intel® i350 Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	G200 (Renesas SH7757 BMC w/ graphic controller)
Super I/O	Nuvoton W83527


Input / Output

Serial ATA	2x SATA 3.0 ports (6Gbps) 8x SATA 2.0 ports (3Gbps)
LAN	4x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
JBOD	2x JBOD Expansion Ports
USB	9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port / 1 Header

Chassis

Form Factor	4U Rackmount
Model	CSE-847E16-R1K28LPB


Dimensions

Width	17.2" (437mm)
Height	7" (178mm)
Depth	27.5" (699mm)
Weight	Net Weight: 67 lbs (30.4 kg) Gross Weight: 104 lbs (47.2 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED


Expansion Slots

PCI-Express	3x PCI-E 3.0 x16 slots (Low-profile) 1x PCI-E 3.0 x8 slot (Low-profile)


Drive Bays

Hot-swap	36x Hot-swap 3.5" SAS / SATA HDD trays Double-sided: 24 front + 12 rear HDD Bays
Fixed	Optional Internal Drive Bracket suppports 2x 2.5" or 1x 3.5" devices (up to 2 supported)


Backplane

SAS2 / SATA3 backplane


System Cooling

Fans	7x 8cm hot-swap cooling fans Redundant cooling


Power Supply with Digital Switching Control & PMBus 1.2
1280W High-Efficiency (95%+) power supply
AC Input	1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A
Certification	80 PLUS Platinum [ Test Report ]


System BIOS

BIOS Type	64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)