Key Features

1. 1400W Redundant High-efficiency
    ( Gold) Power Supplies
2. 5x 3.5" SAS/SATA Hot-swappable
    Drive Bays
3. 3x 5.25" Peripheral Drive Bays
    (One with Floppy Drive Bezel)
4. 7x Full-height, Full-length
    expansion slot
5. 3x Hot-Swappable Cooling Fans
6. 3x 8200 RPM Hot-swap PWM
    Rear-Exhaust Fans
7. 2x Front USB Ports
8. Power Switch, Reset Switch &
    6 LED Indicators
9. Full SES2 support is available with SAS motherboards and other compatible components.

Standard Parts List

     Part Number    Qty    Description
Chassis    CSE-748TQ-R1400B    1    4U chassis with redundant 1400W PWS (Black)
Cable 1    CBL-0044L    5    SATA CABLE 57.5CM FLAT S-S PBF. 26AWG flat
Backplane    CSE-SAS-M35TQ    1    M35 SAS BACKPLANE W/AMI MG9072
Power Supply    PWS-1K41F-1R    2    1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
Power Distributor    PDB-PT748-6824    1    PDB for new SC748 with 6x8pin to support X9 Quad.
Cable 2    CBL-0087    1    Front Control Cable Round 16 pin to 16 pin Ribbon 20
Cable 3    CBL-0174L    2    PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,14AWG,15A,125V,RoHS/REACH
Cable 4    CBL-0216L    3    4 PIN TO 4 PIN MIDDLE FAN POWER EXTENSION, 20cm. 24AWG(PWM)
Cable 5    CBL-0263L    1    2CH USB 2.0 10 pin to 10 pin cable, 77cm. 26AWG
Cable 6    CBL-0286L    3    4 to 4 pin rear fan pwr ext w/ square header, 30cm (PWM). 24AWG
Front Panel    CSE-PT60L-B    1    BLACK SC743 FRONT LED PLATE W/O LOGO, PB FREE
Fan 1    FAN-0115L4    3    92x92x38 mm, 7.5K RPM, PWM Fan for SC748 rev K
Fan 2    FAN-0116L4    3    80x80x38 mm, 8.2K RPM, PWM Fan for SC748 rev K
Front Panel    FPB-FP743-D    1    Front control board dual color
Drive Tray(s)    MCP-220-00005-00    3    5.25
Drive Tray(s)    MCP-220-00010-01    2    Black 5.25
Drive Tray(s)    MCP-220-00059-0B    1    Black 5.25
Part(s)    MCP-290-74502-0B    1    Plastic feet (4 pcs set) for 4U tower chassis, black color
Part(s)    MCP-420-74301-04    1    Blue Plastic Add-on Card Holder (1) and Tab (7) for SC74X workstation
Mobile Rack    CSE-M35BP    1    Black Disk Array Mobile Rack with 5 Drives

Optional Parts List

     Part Number    Qty    Description
Heatsink / Retention    -    -    Please refer to our Thermal Components Matrix
Air Shroud    CSE-PT0125    -    Plastic air shroud for H8QGL-i/6F, H8QIi/6-F and H8QME/8-2
MCP-310-74802-0B    -    Mylar air shroud for H8QGi/6-F and H8QMi/3-2
MCP-310-74803-0B    -    Mylar air shroud for X8QBE/6-F rev 1.11
MCP-310-74805-0B    -    Mylar air shroud for SC748 (X9QRi/7-TF+,X8QBE/6-(L)F)
Mounting Rails    MCP-290-00001-00    -    4U SC748 mounting rails (not for Rev K or above chassis)
MCP-290-00059-0B    -    26.5" to 36.4" rail set + handles, Quick Release for 4U 17.2"W tower for Rev K or above chassis
MCP-290-00058-0N    -    19" to 26" Short rail set, quick/quick, optional for 2~4U 17.2"W for Rev K or above chassis
MCP-290-00060-0N    -    Square hole to round hole rail adaptor set for Rev K or above chassis
Mobile Rack    CSE-M35TQ
CSE-M35S
CSE-M28E1
CSE-M28E2
CSE-M14T    -    Mobile Rack options
Adaptor HDD Carrier    MCP-220-00080-0B    -    Adaptor HDD carrier to install 2.5" HDD in 3.5"
HDD tray