ATIC Computers - Controllers / Supermicro - AOC-LPZCR2 - LPZCR2 ZCR Zeon-CH RAID SAS SATA SCSI Card, PCI-X, LP

0-Chanel Raid Controller - PCI-X 64-bit/100Mhz Slot - Low-Profile - RAID 0/1/5/10/50 (for SAS/SATA), 0/1/5/10 ( for SCSI) Supported - Intel 80321 600MHz I/O Processor Controller - 256MB DDR3 Cache - 1 Year Depot Carry-In Mfg. Warranty

Key Features

Dimensions	2.5" x 6.6 " (W x H)
Processor	Intel 80321 600MHz I/O Processor
RAID Levels	0, 1, 5, 10 50 (SAS and SATA modes)
Cache Memory	256 MB onboard ECC DDR MEmory
Bus Type	64-bit / 100MHz PCI-X
Key RAID Features	RAID detection, buildup, delete, error detection Disk initialization and verification Hot-spare disk drive support for easy replacement Hot-spare disk support with automatic rebuild Monitors the functionality of LED and alarm for attached disk drives Indicates disk drive failure with audible alarm and LED Indicates disk drive rebuild through LED Eliminates human error such as removal of wrong disk drive(s) Monitors temperature and system overheat


Support / Advantages

Advantages	Supports SAS, SATA and SCSI modes (interchangeable via jumper settings) Supports SAS SES2 Enclosure Management Software for SAS mode Utilizes motherboard's existing SAS / SATA / SCSI I/O Channels. Eliminates the need of a SAS / SATA / SCSI I/O chip on motherboard. Saves on cost of a regular RAID card. Offers high-speed throughput, scalability and space-saving/cost-effective hardware RAID solution
Compatible Operating Systems	Microsoft Windows XP / 2000 / 2003 For Windows 2003 Server, please install the driver from the CD instead of the default driver in Windows. Linux SuSE 9.0 / 9.1 / 9.2, RedHat 3.0 / 4.0
Management Software	Storage Management (ASM) Flash Utility (AFU) Configuration Utility (ACU)

Compatible Products

Motherboard	• X6DA3-G2 (SAS) • X6DH3-G2 (SAS) • X6DHP-3G2 (SAS) • X7DA3 (SAS) • X7DB3 (SAS) • X7DBR-3 (SAS) • H8DSR-8 (SATA) • X6DAL-TB2 (SATA) • X6DAT-G (SATA) • X6DHT-G (SATA) • X6DHP-TG (SATA) • H8DA8 (SCSI) • H8DSP-8 (SCSI) • H8DSR-8 (SCSI) • H8SSP-8 (SCSI) • PDSG4 (SCSI) • PDSM4 (SCSI) • PDSM4+ (SCSI) • PDSMP-8 (SCSI) • P8SC8 (SCSI) • X6DA8-G (SCSI) • X6DA8-G2 (SCSI) • X6DH8-G (SCSI) • X6DH8-G2 (SCSI) • X6DH8-G2+ (SCSI) • X6DH8-XB (SCSI) • X6DH8-XG2 (SCSI) • X6DHP-8G (SCSI) • X6DHP-8G2 (SCSI) • X6DLP-4G2 (SCSI) • X6QT8 (SCSI) • X7DA8 (SCSI) • X7DB8 (SCSI) • X7DB8+ (SCSI) • X7DB8-X (SCSI) • X7DBP-8 (SCSI) • X7DBR-8 (SCSI) • X7DBX-8 (SCSI) • X7DVA-8 (SCSI) • NOTE: The AOC-LPZCR2 is compatible ONLY with these motherboards.
System	• SS6014P-32 (SAS) • SS6014P-32R (SAS) • SS6015B-3V (SAS) • SS6015B-3RV (SAS) • SS6024H-32R (SAS) • SS7044A-32 (SAS) • SS7044H-32R (SAS) • SS6014P-T (SATA) • SS6014P-TR (SATA) • SS6024H-T (SCSI) • SS6024H-TR (SCSI) • SS7044H-T (SATA) • SS7044H-TR (SATA) • AS1020A-T (SATA) • SS5015P-8 (SCSI) • SS5015P-8R (SCSI) • SS5025M-4+ (SCSI) • SS6014P-8 (SCSI) • SS6014P-8R (SCSI) • SS6014P-82 (SCSI) • SS6014P-82R (SCSI) • SS6015B-8V (SCSI) • SS6015P-8 (SCSI) • SS6015P-8R (SCSI) • SS6015X-8V (SCSI) • SS6023P-8R (SCSI) • SS6024H-32 (SCSI) • SS6024H-32R (SCSI) • SS6024H-82 (SCSI) • SS6024H-82R (SCSI) • SS6024H-8R (SCSI) • SS6025B-3V (SCSI) • SS6025B-3RV (SCSI) • SS6025B-8 (SCSI) • SS6025B-8R+V (SCSI) • SS6034H-X8R (SCSI) • SS6035B-8 (SCSI) • SS6035B-8R (SCSI) • SS6035B-8R+V (SCSI) • SS7044A-32 (SCSI) • SS7044A-8 (SCSI) • SS7044A-82 (SCSI) • SS7044A-82R (SCSI) • SS7044H-32R (SCSI) • SS7044H-82 (SCSI) • SS7044H-82R (SCSI) • SS7044H-82R+ (SCSI) • SS7044H-X8R (SCSI) • SS7045A-3 (SCSI) • SS7045A-8 (SCSI) • SS7045B-3 (SCSI) • SS7045B-8R+ (SCSI) • AS1010P-8 (SCSI) • AS1010P-8R (SCSI) • AS1020P-8 (SCSI) • AS1020P-8R (SCSI) • AS1020S-8 (SCSI) • NOTE: The AOC-LPZCR2 is compatible ONLY with these systems.
Compatible Controllers	Adaptec SAS Host Controller (AIC-9410) Marvell Hercules-2 SATA Host Controller (AIC-8130 or AIC-8140) Adaptec Ultra320 SCSI Host Controller (AIC-7901 or AIC-7902) AMI SAS Enclosure Management Controller (MG-9071 or MG-9072)