ATIC Computers - Servers / Supermicro S2011 - SSG-6027R-E1CR12L - SSG-6027R-E1CR12L 2U Storage Server 2x S2011 16x DDR3ER 12x 3.5" 2x920W

( CSE-826BE1C-R920LPB X9DRD-EF ) 2U Storage Server - 2x LGA2011 for Intel E5 26xx v1/V2 CPU - via LSI 3008 HBA 12Gb/s SAS - 16x DDr3-ECC/REG slots ( max 1Tb RAM ) - 12x 3.5" Hot-swap SAS3/SATA3 HDD, bays w/ SES2; Optional 2x 2.5" Hot- swap HDD bays (rear) - 6x PCI-E 3.0 x8 (LP, HL); Slots 1 & 2 - Intel® i350 GbE Controller; 2x ports - Server remote management: IPMI 2.0, KVM over LAN - 2x 920W Redundant powers - 2U Rackmount

Product SKUs

SSG-6027R-E1CR12L	SuperServer 6027R-E1CR12L (Black)


Motherboard

Super X9DRD-EF


Processor/Cache

CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family^† (up to 130W TDP)
Note	† BIOS version 3.0 or above is required
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s


System Memory

Memory Capacity	16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C602J Chipset
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS3 AOC	SAS3 via LSI 3008 AOC; IT Mode/Pass-through
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW


Input / Output

Serial ATA	2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps)
SAS	8x SAS3 ports (12Gbps)
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	9x USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port / 1 Header

Chassis

Form Factor	2U Rackmount
Model	CSE-826BE1C-R920LPB


Dimensions

Width	17.2" (437mm)
Height	3.5" (89mm)
Depth	25.5" (648mm)
Gross Weight	61 lbs (27.7 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED


Expansion Slots

PCI-Express	6x PCI-E 3.0 x8 slots (Low-profile, HL) Slot 1 & 2 Occupied by JBOD Expansion Port and HBA


Drive Bays

Hot-swap	12x 3.5" Hot-swap SAS3/SATA3 HDD bays w/ SES2
Optional	2x 2.5" Hot-swap HDD bays (rear)


Backplane

SAS3 Backplane: SAS3 12Gbps single expander backplane, w/ LSISAS3x28 expander, support 12x 3.5" drives, with 4x mini-SAS HD connectors, 2 for uplink and another 2 for downlink


System Cooling

Fans	3x 8cm 9.5K RPM, 4-pin PWM fans


Power Supply with Power Distributor

920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input	100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output	4 Amp @ +5V standby 75 Amp @ +12V
Certification	Platinum Certified [ Test Report ]


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI


Operating Environment / Compliance

RoHS	RoHS Compliant