Local: 604-875-8859   Toll-Free: 1-877-279-2469     email: [email protected]

Motherboards - Supermicro S1150

SKU : 108154         Mfg. Part No. : MBD-X10SLL-SF-O

X10SLL-SF S1150 E3/i3 4xSATA 2xGLAN IPMI mATX

Socket H3 / LGA 1150 - 1 CPU(s) Max. - Intel C222 Chipset - 2 RAM Slots - Max. 16GB DDR3 ECC UDIMM - Aspeed AST2400 Graphics - 1x VGA Ports - 2x PCIeX8 Slots - 2x SATA 3.0Gbps - 2x SATA 6.0Gbps - RAID 0/1 Supported - Dual Gigabit LAN - MicroATX (9.6" x 9.6") Form Factor - 1 Year Depot Carry-In Mfg. Warranty

Price : $270.00* Qty.  

(* - Cash Discounted Price (Reg. $283.50))

 

Product SKUs
MBD-X10SLL-S	X10SLL-S (Bulk Pack)

Physical Stats
Form Factor	uATX
Dimensions	9.6" x 9.6", (24.4cm x 24.4 cm)

Processor/Cache
CPU	Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors (up to 65W) Single Socket H3 (LGA 1150)

System Memory
Memory Capacity	2x 240-pin DDR3 DIMM sockets Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5V, 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C222 Express PCH
SATA	SATA3 (6Gbps) w/ RAID 0, 1 SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
Network Controllers	Intel® i217LM + Intel® i210AT Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA	BMC integrated Aspeed AST2400

Input / Output
Serial ATA	2x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports
LAN	2x Gigabit Ethernet LAN ports
USB	4x USB 2.0 ports (2 rear, 2 via header)
VGA	1x VGA D-Sub Connector
Serial Port / Header	1x COM port (1 header)
DOM	SATA DOM (Disk on Module) power connector support
TPM	1x TPM 1.2 20-pin Header

Expansion Slots
PCI-Express	1x PCI-E 3.0 x8 (in x16) slot 1x PCI-E 3.0 x8 slot

System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Management
Software	SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on

PC Health Monitoring
Voltage	Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header